Car damage guide · Lease returns & selling

BVRLA Fair Wear and Tear Explained

The BVRLA fair wear and tear standard is the industry guide many UK lease companies use to decide what counts as normal wear on a returned car and what counts as chargeable damage. It is commonly summarised as allowing small scratches that polish out, a few small unbroken dents and minor stone chips, but your own lease company's return standard can differ.

What is the BVRLA?

The BVRLA is the British Vehicle Rental and Leasing Association. It is the trade body for companies that rent and lease vehicles in the UK.

It publishes the industry fair wear and tear guide, which many UK lease companies use as the basis for their own return standards. This page is a general explanation, not legal advice.

What fair wear and tear means

Fair wear and tear is the normal, light wear you would expect on a car of that age and mileage that has been looked after. Damage is anything beyond that.

When a lease car is returned, it is inspected against the standard. Items outside it may be charged for under your lease agreement. Always check the current BVRLA guide and your own lease company's return standard, which can differ.

How scratches are usually treated

The guide is commonly summarised as accepting scratches of 25mm or less where primer or bare metal is not showing, as long as they can be polished out.

A deeper scratch, one showing primer or metal, or a long key scratch is likely to fall outside that. The fingernail test is a useful first check: if your nail catches, it is into the colour and will not polish out.

How dents are usually treated

Dents are commonly summarised as acceptable if they are 15mm or less in diameter, there are no more than two per panel and the paint is not broken.

A larger door ding, several dents on one panel, or a dent with chipped paint may be charged. Dents with unbroken paint can often be fixed with paintless dent removal.

How stone chips are usually treated

A small number of stone chips in keeping with the car's age and mileage is generally acceptable. A bonnet or bumper peppered with chips, or chips that have started to rust, may not be.

See our stone chip repair guide for how chips are fixed.

Other areas the guide covers

The full BVRLA guide goes well beyond paintwork. It also covers areas such as bumpers, wheels and tyres, glass, lights, interior and documents. We only repair cosmetic bodywork damage, so read the current guide for the other sections.

For scuffed bumpers, see bumper scuff repair.

Using the standard before your return

Read the standard alongside your lease company's return guide. Walk round the car in daylight, measure any marks and note anything that looks outside the standard.

Our fleet and lease return repairs service is set up for this, and our guide on avoiding lease return damage charges covers the practical steps.

Common questions

Is the BVRLA guide legally binding?

The guide is an industry standard. What applies to you is set by your lease agreement and your lease company's own return standard, so check those documents.

Do all lease companies use the BVRLA standard?

Many UK lease companies base their return standards on it, but each company can set its own. Always read your lease company's return guide.

How do I measure a scratch or dent?

A ruler or a coin for scale works. Photograph each mark with the ruler in shot, which also helps if you send photos to us for a quote.

Can SmartMend tell me if my car will pass?

We can tell you from your photos which marks we can repair and give you a fixed price. Only your lease company can confirm how they will assess the car.

Get a fixed price for your repair

Send a couple of photos, one close up and one from further back, and we'll reply with a fixed price, usually the same day. You're under no obligation to book.

Get my free quote

Or call 07784 628096 · WhatsApp us

Get my free quote