Car damage guide · Lease returns & selling

How to Avoid Lease Return Damage Charges

Start well before your return date: read your lease company's return guide, check the car in daylight against it, and get a fixed price to repair anything outside the standard. Book repairs early enough to allow for weather, then clean and photograph the car on handback day.

Start early

Leaving it to the last week is the most common mistake. Paint repairs need dry conditions, and if heavy rain or freezing weather means we need to rearrange, you want time to spare.

Starting early also gives you time to compare a repair price against what you might be charged, and decide calmly.

Read your return guide

Your lease company's return guide sets out what they accept and what they charge for. Many are based on the BVRLA standard, but each company can set its own rules.

Our guide to BVRLA fair wear and tear explains how the industry standard is commonly summarised. Always go by your own lease agreement and return guide.

Inspect the car properly

Wash the car and check it in daylight, not under a garage light. Go panel by panel:

  • bumper corners and lower edges, where kerb and corner scrapes are common
  • doors and wings for scratches and dings
  • bonnet and front bumper for stone chips
  • wheels, glass, tyres and interior

Measure marks and photograph each one with a ruler or coin in shot.

Decide what to repair

Sort your list into three groups: within the standard, clearly outside it, and borderline. Focus on what is clearly outside it.

Typical lease return jobs include scuffed bumpers, scratches through to the colour, and dents with chipped paint. A bumper scuff is surface damage to the paint on a plastic bumper, usually from a light knock or scrape. Small dents where the paint is not broken may suit paintless dent removal.

Our guide price is from £150 per panel. The bumper scuff repair cost guide explains what affects the price. Send us photos and we will give you a fixed price, usually the same day.

Book the repairs in good time

Our lease return repair service comes to your home or work. Most single-panel repairs take a few hours on the day, and several panels can take most of a day.

It helps to have a nearby power socket and space around the damaged side for the technician to work. Avoid jet washing or machine polishing repaired areas for 7 days afterwards, so plan the final clean around that.

On handback day

Hand the car back clean, inside and out. Inspectors can only judge what they can see, and a clean car is easier to assess fairly.

Take your own dated photos of every panel, the wheels and the interior just before handback. Keep the repair invoices too.

Damage we cannot fix on the drive

SMART repair is not for split bumpers, panels pushed out of line, crash damage or rust bubbling through. We'll tell you from your photos if it needs a bodyshop, so you can decide whether to repair it or leave it for the lease company to assess.

Common questions

Is it cheaper to repair damage before handing back a lease car?

It can be, but it depends on the damage and on how your lease company charges. Get a fixed repair price and compare it with your return guide before deciding.

Can you repair a company or fleet car?

Yes. Our fleet and lease return repairs service covers company cars and fleet vehicles as well as personal lease cars.

What if I find damage the day before handback?

Send us photos as soon as you can and we will tell you what is possible. Paint needs dry weather, so a very short notice job is not always possible.

Get a fixed price for your repair

Send a couple of photos, one close up and one from further back, and we'll reply with a fixed price, usually the same day. You're under no obligation to book.

Get my free quote

Or call 07784 628096 · WhatsApp us

Get my free quote